Fabrication of polarizer by metal evaporation of fused silica surface relief gratings

Our aim was to produce metal-wire grating polarizers by a simple two-step method. First, fused silica surface relief gratings were generated by two-beam interferometric laser-induced backside wet etching (TWIN-LIBWE) technique. The grating period was varied from 150 nm to 860 nm (p=150, 280, 460, 86...

Teljes leírás

Elmentve itt :
Bibliográfiai részletek
Szerzők: Kiss Bálint
Flender Roland
Kopniczky Judit
Ujhelyi Ferenc
Vass Csaba
Dokumentumtípus: Cikk
Megjelent: 2015
Sorozat:JOURNAL OF LASER MICRO NANOENGINEERING 10 No. 1
doi:10.2961/jlmn.2015.01.0011

mtmt:2854485
Online Access:http://publicatio.bibl.u-szeged.hu/8012
LEADER 01800nab a2200253 i 4500
001 publ8012
005 20190403094425.0
008 160914s2015 hu o 0|| angol d
022 |a 1880-0688 
024 7 |a 10.2961/jlmn.2015.01.0011  |2 doi 
024 7 |a 2854485  |2 mtmt 
040 |a SZTE Publicatio Repozitórium  |b hun 
041 |a angol 
100 1 |a Kiss Bálint 
245 1 0 |a Fabrication of polarizer by metal evaporation of fused silica surface relief gratings  |h [elektronikus dokumentum] /  |c  Kiss Bálint 
260 |c 2015 
300 |a 53-58 
490 0 |a JOURNAL OF LASER MICRO NANOENGINEERING  |v 10 No. 1 
520 3 |a Our aim was to produce metal-wire grating polarizers by a simple two-step method. First, fused silica surface relief gratings were generated by two-beam interferometric laser-induced backside wet etching (TWIN-LIBWE) technique. The grating period was varied from 150 nm to 860 nm (p=150, 280, 460, 860 nm) by the changing of the incident angle of interfering beams. In the second step the gratings were selectively evaporated by thin silver (Ag) film using near grazing incidence (80°) ar-rangement to produce narrow metal wires. The thickness of metal film was 30±5 nm. The morphol-ogy of fabricated metal-wire structures were studied by scanning electron microscopy. The polariz-ers were tested in infrared wavelength range (λ=1532 nm). According to our measurements, the po-larisation contrast of 280 nm period structures was 1:10 for TE:TM transmitted modes. In this case the filling factor of metallic stripes are close to 0.7. 
700 0 1 |a Flender Roland  |e aut 
700 0 1 |a Kopniczky Judit  |e aut 
700 0 1 |a Ujhelyi Ferenc  |e aut 
700 0 1 |a Vass Csaba  |e aut 
856 4 0 |u http://publicatio.bibl.u-szeged.hu/8012/1/93323a9ca4067d8a3096345e7f85cd3b.pdf  |z Dokumentum-elérés