The Importance of Catalyst Choice in Photoelectrochemical Glycerol Oxidation

Photoelectrochemistry is a promising method for the direct conversion of sunlight into valuable chemicals by combining the functions of solar panels and electrolyzers in one technology. In most studies, semiconductor/catalyst photoelectrode assemblies are used to achieve reasonable efficiencies. At...

Teljes leírás

Elmentve itt :
Bibliográfiai részletek
Szerzők: Balog Ádám
Ng Eva
Samu Gergely Ferenc
Kecsenovity Egon
Csík Attila
Giménez Sixto
Janáky Csaba
Dokumentumtípus: Cikk
Megjelent: 2025
Sorozat:CARBON ENERGY 7 No. 11
Tárgyszavak:
doi:10.1002/cey2.70065

mtmt:36350740
Online Access:http://publicatio.bibl.u-szeged.hu/38681
LEADER 02596nab a2200289 i 4500
001 publ38681
005 20260115084913.0
008 260115s2025 hu o 000 eng d
022 |a 2096-9570 
024 7 |a 10.1002/cey2.70065  |2 doi 
024 7 |a 36350740  |2 mtmt 
040 |a SZTE Publicatio Repozitórium  |b hun 
041 |a eng 
100 1 |a Balog Ádám 
245 1 4 |a The Importance of Catalyst Choice in Photoelectrochemical Glycerol Oxidation  |h [elektronikus dokumentum] /  |c  Balog Ádám 
260 |c 2025 
300 |a 10 
490 0 |a CARBON ENERGY  |v 7 No. 11 
520 3 |a Photoelectrochemistry is a promising method for the direct conversion of sunlight into valuable chemicals by combining the functions of solar panels and electrolyzers in one technology. In most studies, semiconductor/catalyst photoelectrode assemblies are used to achieve reasonable efficiencies. At the same time, unlike in dark electrochemical processes, the role of the catalyst is not straightforward in photoelectrochemistry, where the onset potential of the redox process should be mostly determined by the flatband potential of the semiconductor. In addition, the energy of holes (i.e., the surface potential) is independent of the applied bias; it is defined by the valence band (VB) position. In this study, we compared PdAu, Au, and Ni on Si photoanodes in the photoelectrochemical (PEC) oxidation of glycerol at record high current densities (> 180 mA cm ‒2 ), coupled to H 2 evolution at the cathode. We successfully decreased the energy requirement (i.e., the cell voltage) of the paired conversion of glycerol and water by 0.7 V by exchanging the widely studied Ni catalyst with PdAu. The catalyst choice also dictates the product distribution, resulting mainly in C3 products on PdAu, glycolate (C2 product) on Au, and formate (C1 product) on Ni, without complete mineralization of glycerol (CO 2 formation) that is difficult to rule out in dark electrochemical processes (as demonstrated by comparative measurements). Finally, we achieved a bias‐free (standalone) operation with PdAu/Si and Au/Si photoanodes by combining the PEC oxidation of glycerol with oxygen reduction reaction (ORR). 
650 4 |a Kémiai tudományok 
700 0 1 |a Ng Eva  |e aut 
700 0 1 |a Samu Gergely Ferenc  |e aut 
700 0 1 |a Kecsenovity Egon  |e aut 
700 0 1 |a Csík Attila  |e aut 
700 0 1 |a Giménez Sixto  |e aut 
700 0 1 |a Janáky Csaba  |e aut 
856 4 0 |u http://publicatio.bibl.u-szeged.hu/38681/1/CarbonEnergy-2025-Balog-TheImportanceofCatalystChoiceinPhotoelectrochemicalGlycerolOxidation.pdf  |z Dokumentum-elérés