Improvement of water quality with high fluoride content
The improvement of water quality with high fluoride content was carried out by precipitation of pollutant with Ca(OH)2 and post-treatment by electrocoagulation. The applied current densities were 100, 200 and 300 A/m2 and the electrolysis time was 60 minutes. The fluoride concentration was lowered f...
Elmentve itt :
Szerzők: | |
---|---|
Testületi szerző: | |
Dokumentumtípus: | Könyv része |
Megjelent: |
2017
|
Sorozat: | Proceedings of the International Symposium on Analytical and Environmental Problems
23 |
Kulcsszavak: | Analitikai kémia |
Online Access: | http://acta.bibl.u-szeged.hu/56199 |
LEADER | 01364naa a2200217 i 4500 | ||
---|---|---|---|
001 | acta56199 | ||
005 | 20220808154938.0 | ||
008 | 190102s2017 hu o 1|| zxx d | ||
020 | |a 978-963-306-563-1 | ||
040 | |a SZTE Egyetemi Kiadványok Repozitórium |b hun | ||
041 | |a zxx | ||
100 | 1 | |a Ihos Monica | |
245 | 1 | 0 | |a Improvement of water quality with high fluoride content |h [elektronikus dokumentum] / |c Ihos Monica |
260 | |c 2017 | ||
300 | |a 249-252 | ||
490 | 0 | |a Proceedings of the International Symposium on Analytical and Environmental Problems |v 23 | |
520 | 3 | |a The improvement of water quality with high fluoride content was carried out by precipitation of pollutant with Ca(OH)2 and post-treatment by electrocoagulation. The applied current densities were 100, 200 and 300 A/m2 and the electrolysis time was 60 minutes. The fluoride concentration was lowered from 1000 mg/L to 407 mg/L after the precipitation and to 97 mg/L after the post-treatment by electrocoagulation at 300 A/m2 . The specific energy consumption was calculated and it was in the range of 2.34 – 13.2 kWh/m3. | |
695 | |a Analitikai kémia | ||
700 | 0 | 1 | |a Dragalina Mihaela |e aut |
710 | |a International Symposium on Analytical and Environmental Problems (23.) (2017) (Szeged) | ||
856 | 4 | 0 | |u http://acta.bibl.u-szeged.hu/56199/1/proceedings_of_isaep_2017_249-252.pdf |z Dokumentum-elérés |